Important Things You Should Know About Pressure Washing 

Pressure washing is what you already have done somewhere in your home before. It refers to the same water with a high-pressure water blast although it does not use heated water. However, even if it does not use hot water, a pressure washer can make quick, satisfying, and effective work of blasting any slime and gunk. From cleaning your roof to your walkways, one can agree to the satisfying work of pressure washing Monterey Park

Pressure Washing

The Difference Between Power Washing and Pressure Washing 

As far as these two machines are concerned, these two use the same amount of pressure. The difference of pressure heavily relies on the type and quality of the machine. For instance, an industrial machine really does a better job compared to your household unit.  

If there is one thing that the pressure washer lacks compare to the power washer is the heating element. However, to reiterate it again, the pressure washer also does an amazing job for any stains.  

For your household, a pressure washer is more convenient to use. It is a little harsh on the surfaces which and is ideal for cleaning concrete, brick, and masons. This unit will make the cleaning quick and hassle-free. 

Surfaces You Can Clean with a Pressure Washer 

Concrete Walkways and Driveway 

Concrete surfaces are ideal for this unit because it can withstand pressure without concerns on etching. On the one hand, a finer nozzle is ideal for spot-cleaning grease stains in most occasions. On the other hand, lower pressure and suds coated surface are ideal if you are cleaning a moldy cement.  


Some decks such as Camaru, Tigerwood, and Ipe, (made from South American hardwoods) can withstand the pressure and power just fine. 

Pressure-treated wooden decks are southern yellow pine is soft so it is advised to begin the cleaning with a low-pressure nozzle just to not make the wood etch because of the pressure. The very best way to be sure is to read on the manual about the type of nozzle to be used and what kind of setting is ideal for the type of material you are cleaning. 

Even though decks are okay to clean using this unit, not all decks need a pressure washer. Brands such as TimberTech and Trex produce newer composite decks and they are resistant to stains. This means that they can just be cleaned using some soap, water, and a light scrubbing. 


Not all type of sliding is good to be cleaned using a pressure washer. For instance, an aluminum sliding can dent, so it is advised that you use a lower pressure and a broad nozzle.  

So what are the types of sliding that can withstand the pressure? Vinyl sliding and fiber cement can be okay to pressure wash. This is because both are pliable and can withstand pressure without much concern. Wood clapboard sliding is okay to pressure wash too but make it sure that you consult an EPA-licensed lead remediation specialist especially if your house is built years before 1978. This is because old lead paint, which is a heavy metal, might settle in your soul and may never break down.  


Consumer reports recommend not to use a zero degree nozzle because it poses a safety risk. Water can concentrate that can pierce any surfaces, including the protective boots. 

Read More